Xerox Workcentre 3025 scanner is not working (Ubuntu 18.04)

Question

I read this question. Also I have Xerox Workcentre 3025 multifunction printer and Ubuntu 18.04.

I do the same steps to install this device. Printer works well, but scanner not.

When device is in standby I run gscan2pdf and device wakes up.
But if i try to scan, nothing happened and this https://i.stack.imgur.com/Kwmhy.jpg .

$ lsusb 
Bus 003 Device 003: ID 0924:42da Xerox

The contents of xerox_mfp.conf is

#Xerox WorkCentre 3025
usb 0x0924 0x42da

The file /lib/udev/rules.d/60-libsane.rules does not exists, but /lib/udev/rules.d/60-libsane1.rules exists.

I added

# Xerox WorkCentre 3025
ATTRS{idVendor}=="0924", ATTRS{idProduct}=="42da"

lines also.

What is wrong?

I have the same problem. The scanner worked fine in 14.04. More details here: https://ubuntu-mate.community/t/install-driver-for-xerox-3025-scanner-not-working/18683/5 — marius-ciclistu, Feb 09 '19 at 19:47

score 0 · Answer 1 · answered Sep 03 '18 at 05:54

0

If you edit the file xerox_mfp.conf that sits inside /etc/sane.d with the command

gedit admin:///etc.sane.d/xerox_mfp.conf

with

#Xerox WorkCentre 3025
usb 0x0924 0x42da

I wonder if that would help; do a reboot after you edit the file;

answered Sep 03 '18 at 05:54

pdc

1,102
7
6

Unfortunately, it does not work. – Владислав Дыба Sep 10 '18 at 10:29
@pdc your solution lacks 'sudo ln -sfr /usr/lib/sane/* /usr/lib/x86_64-linux-gnu/sane' – marius-ciclistu Feb 09 '19 at 22:41

score 0 · Answer 2 · answered Feb 09 '19 at 22:39

0

The solution is here: https://askubuntu.com/a/1062147/484859

I did not ran:

sudo adduser $USER lp

answered Feb 09 '19 at 22:39

marius-ciclistu

262
6
19

This unfortunately didn't work for me. – Jonathan Y. May 13 '20 at 00:42
I recently used it in ubuntu 20.04 but after installing the print and scanner by running install.sh from the driver archive from xerox. – marius-ciclistu May 13 '20 at 05:04
I did that too, on Ubuntu 18.04. It didn't work. (Printer works; device wakes up with `scanimage -L`, but ultimately isn't recognized.) – Jonathan Y. May 13 '20 at 05:10
Maybe you need to run the user command also. I used pluma insfead of vi to edit and save that file. – marius-ciclistu May 13 '20 at 05:24

Xerox Workcentre 3025 scanner is not working (Ubuntu 18.04)

2 Answers2