1

Lubuntu did an auto update. After reboot, the wifi is not working and TPLink Archer T9UH v1.0 is not been detected. I tried to remove rtl8814au/5.8.5.1 and reinstall but the error messages are as per below:

'make' -j6 KVER=5.19.0.32-generic KSRC=/lib/modules/5.19.0.32-generic/build....(bad exit status:2)
ERROR(dkms apport): binary package for rtl8814au:5.8.5.1 not found
Error! Bad return status for module build on kernel: 5.19.0-32 generic

An error occurred. dims build error =10.

Please advice how ti fix this issue.

Terrance
  • 39,774
  • 7
  • 116
  • 176
Manimaran Manikam
  • 11
  • 1
  • 1
    I able install a new driver from https://github.com/morrownr/8814au#readme. It resolved the issue. – Manimaran Manikam Feb 19 '23 at 04:41
  • 1
    Does this answer your question? [Install driver rtl8814au on ubuntu 20.04](https://askubuntu.com/questions/1239986/install-driver-rtl8814au-on-ubuntu-20-04) – karel Feb 19 '23 at 04:56
  • Just FYI: If your system is *stable* using the GA kernel (5.15), it's supported for the life of Ubuntu 22.04 LTS (*default on Server systems & some ISOs*) and have your system not upgrade to later HWE kernel stack choices. Refer https://wiki.ubuntu.com/Kernel/LTSEnablementStack for clues esp. "*To downgrade from HWE/OEM to GA kernel:*" section... You can also have both GA & HWE installed, though some closed-source kernel modules (nvidia etc) may prevent both stacks from co-existing; but they can co-exist if using all open-source code. – guiverc Feb 19 '23 at 08:04
  • Please [edit] the question and add output of `lsusb` command. – Pilot6 Feb 19 '23 at 08:06

0 Answers0