How to move the recovery partition on Windows 10?

Question

I upgraded to Windows 10 and a 450Mb Recovery partition was created on my disk. I would like to extend the system partition but the Recovery partition is in the way.

How can I move the Recovery partition to the end of the disk volume without installing third party software?

You can't do it using Windows 10 tools only. Not from Disk Management, neither using DISKPART. I personally recomend [MiniTool Partition Wizard](https://www.partitionwizard.com/). Always backup your files before doing these kinds of operations. — ComputerUser121212, Jun 27 '19 at 21:27
Thanks for the recommendation @milo8505. I have Windows 10 Pro version and for that I expected to handle such trivial tasks natively, now I see this is again something not to look for in the MS world... :/ — pharsfalvi, Jun 28 '19 at 00:58
It's not a trivial task. Windows relies on this partition for specific functions. It's not very large either, so there's no great benefit to moving it for the majority of people. — music2myear, Jun 28 '19 at 18:45
For future reference, you may be able to move the recovery partition (Windows RE) by deleting the partition manually and following the Windows RE deploy instructions on MSDN: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/deploy-windows-re — citelao, Jun 05 '20 at 20:10
Warning: Minitool will install the Avast malware. You may be able to remove it, if you download `avastcleaner` and do it from safe mode. — unhammer, Oct 07 '20 at 09:53
@music2myear If the disk is resized, the recovery partition interferes with contiguity. — R.J. Dunnill, Oct 07 '21 at 15:36

VainMan · Answer 1 · 2021-02-16T03:38:53.050

103

According to MS's documentation, capture-and-apply-windows-system-and-recovery-partitions, the recovery partition can be captured and applied to a new partition. I have made it to work on my windows 10 PC.

Warning 1: You must know what the following commands do before you execute them. Check the link above and MS's documentation for diskpart, dism and reagentc.

Warning 2: Check disk numbers, partition numbers and volume letters carefully before executing commands.

Use diskpart to find current recovery partition and assign a driver letter(eg. O) to it:

DISKPART> list disk
DISKPART> select disk <the-number-of-disk-where-current-recovery-partition-locate>
DISKPART> list partition
DISKPART> select partition <the-number-of-current-recovery-partition>
DISKPART> assign letter=O

Create an image file from current recovery partition:

Dism /Capture-Image /ImageFile:C:\recovery-partition.wim /CaptureDir:O:\ /Name:"Recovery"

Apply the created image file to another partition(eg. N) that will become the new recovery partition:

Dism /Apply-Image /ImageFile:C:\recovery-partition.wim /Index:1 /ApplyDir:N:\

Register the location of the recovery tools:

reagentc /disable
reagentc /setreimage /path N:\Recovery\WindowsRE
reagentc /enable

Use diskpart to hide the recovery partition:

For UEFI:

DISKPART> select volume N
DISKPART> set id="de94bba4-06d1-4d40-a16a-bfd50179d6ac"
DISKPART> gpt attributes=0x8000000000000001
DISKPART> remove

For BIOS:

DISKPART> select volume N
DISKPART> set id=27
DISKPART> remove

Reboot the computer, now the new recovery partition should be working
(Optional) Delete the old recovery partition:

DISKPART> select volume O
DISKPART> delete partition override

(Optional) Check if the recovery partition is working:
1. Show the current status:
```
reagentc /info
```
2. Specifies that Windows RE starts automatically the next time the system starts:
```
reagentc /boottore
```
3. Reboot the computer and do your stuff in Windows RE (eg. enter CMD and run some tools)

edited Feb 16 '21 at 03:38

answered Oct 21 '20 at 19:04

VainMan

1,131
1
4
6

1

While creating the image, `dism` forced me to give a name with `/name` option, but other than that I was able to get through step 4. I confirmed that `reagentc /info` showed the status as `Enabled`, but once I changed the id to `27`, status became `Disabled` and `reagentc /boottore` complained about the same. What could I be doing wrong? – haridsv Dec 31 '20 at 11:38
@haridsv Sorry to see now. You can run `reagentc /enable` to enable it again. – VainMan Jan 12 '21 at 17:40
I think I tried that and it gave an error, but I can't recollect it now. I will try again and get back to you with the correct message. – haridsv Jan 12 '21 at 17:50
5

There is a subtle gotcha, at least in Windows 10 2004, which is the one I just did this on: When `reagentc /setreimage /path N:\Recovery\WindowsRE` is executed, it actually *doesn't* change the `Windows RE location`. Once the original partition (O:\) is deleted, `reagentc` reports `Disabled`. The workaround is to run `reagentc /disable` before step 4, or to do step 7 before step 4. – Jake F Jan 16 '21 at 15:01
4

@JakeF Thanks for nice finding this. Added a disable-step before step 4. – VainMan Jan 16 '21 at 17:57
3

I wanted to say great comment, people generally don't care about following through like this, and it bugs me But +1 and thanks are discouraged lol So I thought I might add a suggestion In step 2 there is no name for the image, Windows 10 1904 will complain if there is no name Just great to see thoughtful people putting the effort in, document the world! – Steve Feb 14 '21 at 00:16
@Steve When I did this using empty name was OK. Edited it to use non-empty name, MS has no document about this yet though. – VainMan Feb 16 '21 at 03:47
19

Great instructions! One comment: after following the above instructions, my new recovery partition kept reappearing in Windows Explorer/ This PC as drive 'N' despite the `diskpart > remove` step. I discovered there was a registry key `\DosDevices\N`: under `Computer\HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices` that was making this come back. Deleting that key fixed this issue. YMMV; registry editing precautions apply. This is detailed here: https://answers.microsoft.com/en-us/windows/forum/all/recovery-partition-came-up-and-i-want-to-hide-it/cf725a84-22da-4a6d-a8e5-df41263d3c49 – SSilk Jul 25 '21 at 21:12
It doesn't seem to work. I get the error: "Windows RE cannot be enabled on a volume with BitLocker Drive Encryption enabled." – user2297550 Nov 07 '21 at 14:48
BTW you can also use cygwin's dd to copy and restore the rescue partition once it moved. – jef Dec 21 '21 at 09:57
1

Thanks so much! For me running 'reagentc /info' at the end showed my recovery partition disabled. When I rebooted, it was enabled. – Clay Lenhart Jan 03 '22 at 03:44
Not working. Before step 3 I created a simple NTFS partition with 1.5GB with label "N". I then did step 3 which reports success (but I see no change in partition "N"). Then "reagentc /setreimage /path N:\Recovery\WindowsRE" fails with "REAGENTC.EXE: The specified path was not found." – croraf Jan 15 '22 at 10:33
@VainMan Please don't add disclaimers, as they're not needed and only serve to generate anxiety in inexperienced users - instead, please ensure the answer's directions/steps are correct and link to Microsoft Docs man pages as needed. – JW0914 Apr 15 '22 at 12:20
@JakeF It's not a "gotcha", it's simply the incorrect sequence of commands was executed, as in order for WinRE's path to be changed, it must be disabled _(it's analogous to trying to capture a WIM of `C:` while booted to Windows)_ – JW0914 Apr 15 '22 at 12:25
If you remove the assigned drive letter (N: in the above example) after you're done (e.g. because the partition didn't have one prior to the move) then it will show up as disabled when you check the status. Re-adding the drive letter solves that issue. – Geert Smelt Sep 19 '22 at 14:39
@GeertSmelt Sorry for late reply. You forgot to reboot(step #6) after removing the volume letter. That would keep it enabled. – VainMan Oct 17 '22 at 16:31
1

@user2297550 If you get that message just turn off bitlocker on the "new recovery partition" – Julian Nov 12 '22 at 12:10
Great answer! I used it to resize a disk image for a VM while keeping the recovery partition at the end. I'll call the old recovery partition O and new one N still. I use an MBR, not UEFI, setup, which it turns out imposes limitations on the number of Primary partitions which can be created by default. Since C is Primary, it's best if N is NOT a part of a Logical partition when you do this, which may involve disconnecting external storage disks(/images for VMs) if you have 4 Primary partitions across all disks. See https://superuser.com/q/856945/1255891 – sinback Mar 09 '23 at 02:00
Followup to my guidance for people trying to expand storage in MBR situations. https://answers.microsoft.com/en-us/windows/forum/all/how-to-change-free-space-into-unallocated-space/1a8975a7-0961-4c37-9f78-ddeaefbf7ead also helped me understand the goal - but I didn't use any third-party tools like Greg Carmack suggested in the answer for that post, I just used diskpart and friends. – sinback Mar 09 '23 at 02:04
1

I just discovered that if one adds or removes a physical drive from the computer in a way that causes the boot disk number to change, then the system will crash loading the boot loader (error 0xc00000f). Running step 5 ("hide the recovery partition") fixes this problem, every time. You just need to boot off an installation media (e.g. USB), drop to the command line, run step 5 and when you reboot the system works again. Thank you a million! You saved my day. – Gili Jun 16 '23 at 19:03
For whatever reason I couldn't disable bitlocker on the new recovery partition in the gui. This is how you can do that from the command line: manage-bde -off N: – Tony Salls Jul 21 '23 at 22:33
Also, I too noticed the N: drive in file explorer - you need to remove the drive letter from the partition as well as the volume. in diskpart: Select volume N /n Remove -> that should remove it from file explorer. – Tony Salls Jul 21 '23 at 22:39
As there is only one single partition on my device, I actually did the following instead: Step 1~2 unchanged 3. Disable recovery ``` reagentc /disable reagentc /setreimage /path N:\Recovery\WindowsRE ``` 4. Delete the original recovery (and optionally extned the original C:) 5. Create a new parition for recovery 6. Apply the recovery ``` Dism /Apply-Image /ImageFile:C:\recovery-partition.wim /Index:1 /ApplyDir:N:\ ``` 7. Reenable the recovery ``` reagentc /enable ``` 8~11 Follow the original 5~8 – Teng-pao Yu Aug 11 '23 at 09:28

score 35 · Answer 2 · edited Mar 31 '21 at 12:23

35

I know VainMain's answer from above is probably more careful and thorough, but I've been able to successfully move the partion by simply doing:

In Windows 10: "reagentc /disable"
In Linux boot CD: adjust neighboring partition as needed/move recovery partition
In Windows 10: "reagentc /enable"

Recovery environment was automatically rediscovered and booted WinRE just fine with all recovery options (Reset/System Image restore/etc). I had only 1 C: partition, no special partitioning/dual booting/multiple recovery partition/crazy BCDEDIT settings beforehand, which helped. Tested inside a VM beforehard to make sure. Had no problems after executing live.

If I remember correctly, skipping the first step (disabling via reangetc) would cause the recovery environment to end up misconfigured, not properly re-bootable, and not easily fixed.

edited Mar 31 '21 at 12:23

help-info.de

1,822
5
17
19

answered Mar 29 '21 at 16:14

crimshauw

351
3
2

3

Can confirm, worked perfectly. Used DiskGenius to make a new partition at the end of my NVMe. Clone partition into it, delete old, reactivate. If you want to get fancy you can even set it's "file system" to 27: Microsoft Recovery Partition. It's just a hidden NTFS (but you WILL be able to delete from Disk Management, so be careful!). You may use `reagentc /info` before and after to confirm. – kcdwayne Sep 15 '21 at 02:32
5

Used a Debian live ISO with Gparted to resize my Windows 11 setup, the process was surprisingly smooth! Thanks for the tip! – Xerz Oct 06 '21 at 18:08
2

Using linux to move and resize the recovery partition and after that assigning drive letter and using single line from vainMan's answer worked : reagentc /setreimage /path N:\Recovery\WindowsRE – Gediz GÜRSU Mar 22 '22 at 11:54
After moving the partition with `gparted` and rebooting into Windows, I ran `reagentc /enable` and got "The Windows RE image was not found". But re-running the same command a few minutes later, it worked. So using a live Linux with "gparted" is definitely the easiest way to do that. – mivk Apr 29 '23 at 16:25
1

What happens if I move the recovery partition in front on C: partition so that future disk extensions are easier? – Petr May 16 '23 at 11:31

Stumdra · Answer 3 · 2021-01-03T19:46:37.843

4

Just as an addition to the answer of VainMan and the comment of haridsv (can't comment myself yet):

I had the same problem. Instead of DISKPART> remove execute mountvol N: /d on the command line. If you already have removed the partition first reassign a drive letter to the new recovery partition with assign letter=N (normally reagentc /info should now show the correct status again, otherwise repeat step 4 of VainMans instructions).

edited Jan 03 '21 at 19:46

answered Jan 03 '21 at 19:38

Stumdra

41
3

Actually, diskpart's `remove` and mountvol's `/d` is the same thing in this specific situation. The illusion was probably created by [duplicitous behavior of reagentc's `/setreimage`](https://superuser.com/questions/1453790/how-to-move-the-recovery-partition-on-windows-10#comment2468427_1596291) and the confusion it created. I don't mean "confusion" here as a personal attack — it confused me as well, for about an hour when I tried the workflow again and again with slight variations, until figuring out the actual behavior. – Jake F Jan 16 '21 at 15:10
@JakeF It's not an illusion or duplicitous, it's simply the incorrect sequence of commands was executed, as in order for WinRE's path to be changed, it must be disabled _(it's analogous to trying to capture a WIM of `C:` while booted to Windows)_ – JW0914 Apr 15 '22 at 12:24

score 3 · Answer 4 · edited Jul 07 '21 at 18:57

3

Like the person above I was able to do this by

Open Windows Command prompt as admin and run reagentc /info

this showed recovery as Enabled, and gave the location on the disk and the BCD identifier.

reagentc /disable

reagentc /info showed Disabled, no location and a zero identifier

Shut down and boot into Linux. Move the recovery partition (to the left) with GParted.
Shut down and boot back into Windows, and run reagentc /enable (reported Operation Successful)

reagentc /info now showed Enabled, the same location and a new BCD identifier (one digit different).

edited Jul 07 '21 at 18:57

baddy

11
2

answered Jun 17 '21 at 21:59

Fieldmouse

39
3

5

Please don't simply repeat the answers others have given. Each answer need only be given once. – music2myear Jun 18 '21 at 03:46

score 3 · Answer 5 · edited Mar 01 '23 at 02:02

An example how to move Recovery Partition to OS Partition

diskpart
DISKPART> list volume

  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
  Volume 0         System Rese  NTFS   Partition    500 MB  Healthy    System
  Volume 1     C   Windows11    NTFS   Partition     58 GB  Healthy    Boot
  Volume 2                      NTFS   Partition    617 MB  Healthy    Hidden

DISKPART> select volume 2
DISKPART> assign letter=F
DISKPART> list volume

  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
  Volume 0         System Rese  NTFS   Partition    500 MB  Healthy    System
  Volume 1     C   Windows11    NTFS   Partition     58 GB  Healthy    Boot
  Volume 2     F                NTFS   Partition    617 MB  Healthy    Hidden

DISKPART> exit

xcopy F:\Recovery C:\Recovery /E /H /I

ReAgentc /info

Windows Recovery Environment (Windows RE) and system reset configuration
Information:

    Windows RE status:         Enabled
    Windows RE location:       \\?\GLOBALROOT\device\harddisk2\partition3\Recovery\WindowsRE
    Boot Configuration Data (BCD) identifier: b4c3cf2d-1282-11ed-b4c8-b90a37105c4b
    Recovery image location:
    Recovery image index:      0
    Custom image location:
    Custom image index:        0

ReAgentc /disable

ReAgentc /setreimage /path C:\Recovery\WindowsRE /target C:\Windows

ReAgentc /enable

ReAgentc /info

Windows Recovery Environment (Windows RE) and system reset configuration
Information:

    Windows RE status:         Enabled
    Windows RE location:       \\?\GLOBALROOT\device\harddisk2\partition2\Recovery\WindowsRE
    Boot Configuration Data (BCD) identifier: b4c3cf2f-1282-11ed-b4c8-b90a37105c4b
    Recovery image location:
    Recovery image index:      0
    Custom image location:
    Custom image index:        0

NOTE: Observe that "partition3" changed to "partition2"

delete a Recovery Partition

diskpart
DISKPART> list volume

  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
  Volume 0         System Rese  NTFS   Partition    500 MB  Healthy    System
  Volume 1     C   Windows11    NTFS   Partition     58 GB  Healthy    Boot
  Volume 2     F                NTFS   Partition    617 MB  Healthy    Hidden

DISKPART> select volume 2
DISKPART> detail partition

Partition 3
Type  : 27
Hidden: No
Active: No
Offset in Bytes: 83763396608

  Volume ###  Ltr  Label        Fs     Type        Size     Status     Info
  ----------  ---  -----------  -----  ----------  -------  ---------  --------
* Volume 2     F                NTFS   Partition    617 MB  Healthy    Hidden

DISKPART> delete partition override
DISKPART> exit

when I try to run `ReAgentc /setreimage /path C:\Recovery\WindowsRE /target C:\Windows` I get the message "The specified path was not found" Should the path be `F:\Recovery\WindowsRE` ? — mal, Sep 17 '22 at 13:39
In response to my own comment above - no, the result is the same — mal, Sep 17 '22 at 13:43
I obviously made a mistake somewhere along the way, my files were in `C:\WindowsRE` not `C:\Recovery\WindowsRE` In any case, this worked perfectly once I figured that out. — mal, Sep 17 '22 at 14:24

How to move the recovery partition on Windows 10?

5 Answers5

An example how to move Recovery Partition to OS Partition

delete a Recovery Partition

Linked

Related