2

I did a fresh install of Ubuntu 9.10 and now my Brother MFC 210C won't scan (printing is fine).

I installed the following packages according to the instructions on the Brother site:

cupswrapperMFC210C-1.0.2-3.i386.deb
mfc210clpr-1.0.2-1.i386.deb
brscan2-0.2.4-0.i386.deb

When I start xsane and click "Scan", I get the error: 

failed to start scanner: invalid argument

This scanner was working fine on 9.04 (and previous versions).

EDIT: I also did:

sudo chmod a+w /dev/bus/usb
sudo chmod a+w /dev/bus/usb/*

Didn't help!

JoelFan
  • 3,832
  • 12
  • 44
  • 55
  • For me, other scanning programs besides xsane were working, even acquiring a preview in xsane was working, but this error would pop up at the end of trying to scan. The solution was to delete ~/.xsane (it seems that the old settings file was the source of the problem). – Ron Kaminsky Feb 15 '20 at 21:54

3 Answers3

1

This is described in a Launchpad bug. What seems to be happening is that xsane is getting mixed up between the webcam and the scanner.

Here is the workaround from Launchpad:

  • Open /lib/udev/rules.d/40-libsane.rules file.

Add the following two lines to the end of the device list, before the line # The following rule will disable ...

# Brother scanners
ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes"

  • Unplug webcam from the USB and reboot

  • Install (or reinstall) the 3 Brother packages for the device

    • mfc210clpr-1.0.2-1.i386.deb
    • cupswrapperMFC210C-1.0.2-3.i386.deb
    • brscan2-0.2.4-0.i386.deb

  • Plug the webcam back in

  • Reboot

  • xsane then offers a choice of whether to scan from webcam or scanner. Choose scanner. It will then work.

JoelFan
  • 3,832
  • 12
  • 44
  • 55
0

I spent about an hour trying to solve this one. My system was working then produced the error in question. I knew it was unlikely to be one of the complicated solutions since it was working. It was so simple - the preview scan area was accidentally set to a very small number of pixels. Once this was reset - it worked fine!

John Davey
  • 1
  • Welcome to Super User! Before answering an old question having an accepted answer (look for green ✓) as well as other answers ensure your answer adds something new or is otherwise helpful in relation to them. Here is a guide on [answer]. There is also [tour] for the site tour, and [help] for the help center. – help-info.de Mar 14 '22 at 08:00
0

Is your account member of the scanner group? I had the same error message with brscan3 (for a DPC-185C), adding my account to the scanner group did the trick.

Flow
  • 1,358
  • 2
  • 18
  • 26