5

[Edit: I have now found a solution; see below for my answer]

I want to set up dynamic DNS on my Fritz!Box 7490, so that it is reachable both on IPv4 and IPv6. Note that I want to reach the Fritz!Box itself, and not a computer behind it.

The scenario is that I have both native IPv4 and native IPv6 as dual stack, and both IPv4 and IPv6 are dynamically assigned by my ISP.

I am currently using freedns.afraid.org but would be open for other services as well if what I want can be achieved.

The issue I am facing is that the Fritz!Box GUI only allows for one update URL. In that update URL, I can use one of these three options:

  • Automatic IP address detection (which uses IPv4): http:⁄⁄freedns.afraid.org⁄dynamic⁄update.php?MY-SECRET-TOKEN
  • Pass IPv4 address to freedns.afraid.org: http:⁄⁄freedns.afraid.org⁄dynamic⁄update.php?MY-SECRET-TOKEN&address=<ipaddr>
  • Pass IPv6 address to freedns.afraid.org: http:⁄⁄freedns.afraid.org⁄dynamic⁄update.php?MY-SECRET-TOKEN&address=<ip6addr>

However, what I would need is a link that updates both the IPv4 and the IPv6 address at the same time.

I have seen Dynamic DNS at freedns.afraid.org using a Fritz!Box - this helped as it showed me the <ip6addr> tag, but the person asking the question only wanted to update the IPv6 address, so it is not applicable to me.

Community
  • 1
Martin Elb
  • 111
  • 1
  • 2
  • 7
  • 1
    Is the ISP actually _changing_ your IPv6 prefix? Ever? They should not be doing that. – Michael Hampton Feb 20 '14 at 21:37
  • It is the standard in Germany. People are very concerned with privacy here so they don't want to be tracked across days even when deleting cookies. The big ISPs, in particular Deutsche Telekom, therefore make IPv6 available with a dynamically changing prefix. As I said, I don't really mind but I can understand the concern. – Martin Elb Feb 21 '14 at 10:43
  • 1
    I suppose if privacy conscious people really want that, then it should be an option, but it should not be on for everyone by default! This is significant breakage and makes the local network very hard to manage. – Michael Hampton Feb 21 '14 at 12:04
  • The documentation states that you can specify multiple update-urls in the field "If the update request is to be performed for both IPv4 and IPv6, both requests are written in this field separated by a space.". However when I tried it it doesn't seem to work. But you could give it a try too. – Boris Jun 04 '15 at 08:26
  • Thanks, Boris. This is actually what I am doing now with a different provider though (it may also have worked with freedns.afraid.org). See below for my answer. – Martin Elb Jun 04 '15 at 13:41

7 Answers7

6

The answer is very simple: you just have to enter both update URLs with one blank in between:

https://freedns.afraid.org/dynamic/update.php?[MY-SECRET-TOKEN4]&address=<ipaddr> https://freedns.afraid.org/dynamic/update.php?[MY-SECRET-TOKEN6]&address=<ip6addr>

Works with my FRITZ!Box 7390.

Vlastimil Ovčáčík
  • 2,748
  • 1
  • 24
  • 32
drac
  • 61
  • 1
  • 2
6

Answering my own question as I have now found a solution.

I am now using the service nsupdate.info, which supports what I want: Both IPv4 and IPv6 are reached using the same name, for which both A and AAAA records are provided.

They had specific instructions for the Fritz!Box, which were shown when I was setting up my account. I repeat here what I have in my Fritz!Box settings now:

Dynamic DNS provider: User-defined

Update URL: https://ipv4.nsupdate.info/nic/update https://ipv6.nsupdate.info/nic/update

Domain name: mydomainname.nsupdate.info

User name: mydomainname.nsupdate.info

Password: [as provided by nsupdate.info]

I have been using this service for just over half a year now, and it works flawlessly so far (but I am not logging into my Fritz!Box daily, so your mileage may vary). Apologies for not replying earlier, but I completely forgot about this question, and just received a reminder e-mail as someone else wrote a comment.

Hope this helps others!

Martin Elb
  • 111
  • 1
  • 2
  • 7
2

First of all, I think it is a really stupid idea to give people dynamic IPv6 addresses. Those IPv6 addresses are used in people's internal networks, and changing them all the time makes it really hard to do manage them.

The difference between IPv4 and IPv6 is that you probably only have one IPv4 address. This address belongs to the Fritz!Box, which uses NAT to allow systems on the LAN to access the internet. With IPv6 every system has its own IPv6 address(es). In that situation it might be easier to have every system register their own IPv6 address in the dynamic DNS. It then of course depends on the system if they can actually do that...

Sander Steffann
  • 4,654
  • 15
  • 18
  • 2
    Thanks a lot. To clarify, I don't want to reach a computer behind the Fritz!Box, but I want to access the Fritz!Box itself. You will also find many people that prefer dynamic IPv6 prefixes for privacy reasons (personally, I don't care so much, but I understand the argument). Finally, you can use local, non-routable static addresses in your internal network; a computer can have many IPv6 addresses assigned to it. – Martin Elb Feb 20 '14 at 17:26
  • True, ULA is an alternative for traffic that doesn't leave the local networks next to the global unicast addresses from the ISP. – Sander Steffann Feb 20 '14 at 19:47
0

This bash stuff does the job for me. Make sure you have bash, curl, grep, awk.

ipv6=$(ip -6 a | egrep "inet6.*scope global" --max-count=1 | awk '{print $2}' | awk -F "/" '{print $1}')
curl "https://freedns.afraid.org/dynamic/update.php?[MY-SECRET-TOKEN6]&address=$ipv6"
curl -4 "https://freedns.afraid.org/dynamic/update.php?[MY-SECRET-TOKEN4]"
user1100541
  • 1
0

I stumbeled over the same issue. I have a private IP4 and a IP6 what is somehow official. The target was to update the records at freedns.afraid.org with this information for the same hostname. I created two entry's for the same hostname e.g.

  • DNSTest6and4.mooo.com A
  • DNSTest6and4.mooo.com AAAA

Then update the A-Record (IPV4) with something like: /usr/bin/curl -k "http://{User-IDAfraid}:{PWAfraid}@freedns.afraid.org/nic/update?hostname=DNSTest6and4.mooo.com&myip=10.1.12.119"

Note: Of course I used some logic in a script to find out the actual IP4 of the Interface!

Update the AAAA-Record (IPV6) with the V6 sync Interface of Afraid e.g.: /usr/bin/curl -k "http://v6.sync.afraid.org/u/{Afraid-ID-String}/"

Get the correct {Afraid-ID-String} for your Host via the "Version 2 of the dynamic update interface" of afraid.org https://freedns.afraid.org/dynamic/v2/ It is lined up just right beside your AAAA-Host-Record. This somehow magically works, it looks for me as afraid.org is using the IPV6 that has send out the message as the IPV6 to store to the AAAA-Record of the Host.

That is now working for me as expected

K.

user1216916
  • 1
  • 1
0

I use duiadns.net on my FritzBox router. This link will update both ipv4 and ipv6 (please replace host & md5 password): http://ip.duia.ro/dynamic.duia?host=example.duia.eu&password=79dcca5af01847d34d07c4fae3dc5a13&ip4=127.0.0.1&ip6=::1

Liviu
  • 1
-3

not sure this is still an issue, but I was able to successfully update the IPv4 and IPv6 DynDNS addresses with just one single update link:

http:⁄⁄freedns.afraid.org⁄dynamic⁄update.php?MY-SECRET-TOKEN-OF-IP4HOST&address=?MY-SECRET-TOKEN-OF-IP6HOST&address=

Regards, Arnie

Update: although it shows 'angemeldet' for both IPv4 and IPv6 now, it did not update the IPv4 address. Will try tomorrow using inadyn-mt on the router. On my local linux servers this works fine. Inadyn-mt is available as freetz package.

Arnie
  • 1
  • 1
  • 1
    If you're not sure, yet, of the results, the answer may be premature (and might attract downvotes since it isn't a definitive solution). You might want to delete it until you are ready to post something solid. Deletion will hide it here, but it will be visible to you and you can edit it and then undelete it when you're ready. – fixer1234 Apr 09 '15 at 01:40