I have an Intel® NUC Kit NUC8i7BEH with an Elgato Thunderbolt 3 Mini Dock and I can't make it work with three simultaneous displays. The NUC says it supports three displays and the dock says that it supports two at the same time using a DisplayPort and an HDMI port.
I can only use two displays at the same time, the integrated HDMI of the NUC and only one of the ports of the dock, when I unplug one display from the dock the other becomes active instantaneously.
I am using Ubuntu 18.04.3 LTS with Linux 5.0.0-32-generic and the latests Intel BIOS.
The ThunderBolt device is active and in insecure/legacy mode on the BIOS (Dock's USB port works OK):
> sudo boltctl list
● Elgato Systems Thunderbolt 3 Mini Dock
├─ type: peripheral
├─ name: Thunderbolt 3 Mini Dock
├─ vendor: Elgato Systems
├─ uuid: 99999999-9999-9999-ffff-ffffffffffff
├─ status: authorized
│ ├─ domain: domain0
│ └─ authflags: none
├─ authorized: Mon 01 Jan 2019 02:47:00 AM UTC
├─ connected: Mon 01 Jan 2019 02:47:00 AM UTC
└─ stored: Mon 01 Jan 2019 07:34:26 PM UTC
├─ policy: manual
└─ key: no
Xrandr has the same output with or without the dock plugged and output DP-2 is always the active display that is connected to the dock, even if it is using the HDMI port:
> xrandr
Screen 0: minimum 320 x 200, current 3840 x 1200, maximum 8192 x 8192
DP-1 connected primary 1920x1200+0+0 (normal left inverted right x axis y axis) 582mm x 364mm
1920x1200 59.95*+
1600x1200 60.00
1280x1024 75.02 60.02
1152x864 75.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94
720x400 70.08
DP-2 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 509mm x 286mm
1920x1080 60.00*+
1600x900 60.00
1280x1024 75.02 60.02
1152x864 75.00
1024x768 75.03 60.00
800x600 75.00 60.32
640x480 75.00 59.94
720x400 70.08
HDMI-1 disconnected (normal left inverted right x axis y axis)
Please any hint, advice is welcomed, I searched everywhere but I can't make it work.
Thanks!!!