I have a hp touch-smart 610, and with ubuntu 11.10 everything works out of the box. I tried with the live cd to ubuntu 12.04 and sadly, the touch-screen don't work. I would like to install 12.04, but don't want to lose the touch-screen.
Asked
Active
Viewed 4,526 times
1
-
Can you identify your touchscreen model with `lsusb`? – int_ua May 02 '12 at 06:37
-
If I use the code 'xinput --list' I can see it is a Quanta OpticalTouchScreen. – Tom Gundersen May 07 '12 at 16:30
-
Does `lsusb | grep Quanta` show something? Is it `0408:3000`? – int_ua May 07 '12 at 22:21
-
Bus 001 Device 004: ID 0408:3008 Quanta Computer, Inc. – Tom Gundersen May 08 '12 at 15:25
3 Answers
2
I have the same device on which I installed ub 12.04 (64 bits), I also asked a question about it a while ago. For me also the touchscreen does not work from the live CD. You need to install, then update the system, and then remove a certain section from a Xorg configuration file to make things "work".
See here my question and the solution: Mouse selects everything on its own
(I do not guarantee that it will work for you. Also I do not multitouch, just singletouch. The device should however be able to do multitouch.)
0
Looks like it was affected by this bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/913164
Must be fixed in linux 3.2.0-24.37. Search the page for "3008" to get an additional info.
int_ua
- 8,394
- 12
- 78
- 144
-
It help partly, I go the touch-screen to work, but only with one finger tap and not with two finger tap – Tom Gundersen May 13 '12 at 12:57
-
