0

I've downloaded snappy image to Beaglebone Black: ubuntu-15.04-snappy-armhf-bbb.img.xz.

I wrote the image to an SD card, I booted Beaglebone from the SD card, but I can't find the Beaglebone in my network, I get some Leds flashing!

I downloaded another snappy image, the edge version, but also with this image I cant't boot from SD card. Someone could help me?

I'll wait the FTDI cable that I bougth yesterday and debug to figure out what happens!

Valdir Gomes
  • 1
  • 2
  • Can you please post the `ssh` command you're running? You should be using something such as `ubuntu@your.ip`. Also, please be sure to wait the two minutes, per the [documentation](https://developer.ubuntu.com/en/snappy/start/raspberry-pi-2/). – earthmeLon Mar 21 '16 at 21:54
  • Hi, I figured out that, in fact, "snappy" don't boot, I can boot and SSH ubuntu 14 installed in eMMC, when I put SD card and try to boot from it I can't find BBB in my network! I will try another image. – Valdir Gomes Mar 21 '16 at 22:46

2 Answers2

0

Which BBB do you have. I have one with 2Gb of eMMC and I cant flash Snappy Ubuntu Core because image has 3,9 Gb. After flashing it is smaller. I think I read somewhere that it's going to be better with next version. But I think that it can be problem with 4Gb eMMC too.

Marin Radmilović
  • 45
  • 5
0

I bougth a FTDI serial cable, I reflashed my SD card with this image: ubuntu-15.04-snappy-armhf-bbb.img.xz, I booted from SD and everything works fine! After that I could find the ip address and log from SSH!

Valdir Gomes
  • 1
  • 2