My hdd died a couple of days ago and I am using a DLC to boot up from a flash drive, but the network services seems to be uninstalled/disabled.
Is there anyway to install/enable the network?
Asked
Active
Viewed 555 times
0
-
Which version are you using? – Moab Aug 16 '20 at 14:24
-
What PC hardware is it running on? – Moab Aug 16 '20 at 14:29
-
DLC BOOT 2016 v3.2 with mini Windows 10 x64 – David Rios Aug 16 '20 at 15:23
-
Try this one>>>>https://www.filehorse.com/download-dlc-boot/ – Moab Aug 16 '20 at 15:24
-
Acer Aspire 7715z, 4 gb ram, Dual Core 2.3 ghz, Qualcom Atheros AR8132 PCI-E Fast Ethernet Controller. – David Rios Aug 16 '20 at 15:26
-
I'll try in a copule of days and I'll let you know – David Rios Aug 16 '20 at 15:27
-
Be sure and make the bootable usb on the PC you are going to use it on, some of these rescue disks will pull drivers from the current system when executed. – Moab Aug 16 '20 at 15:31
-
@DavidRios, do not add comments, instead, edit your question to include all information. BTW, try running from a Ubuntu Live USB, which should access the network. – DrMoishe Pippik Aug 17 '20 at 00:55
1 Answers
0
Today I tried under both DLC BOOT versions 3.2 and 3.6 and the network works correctly, the problem was when I tried to log on a remote computer. It didn't matter if the user and password were correct or not, the system throwed the same error (see image link below) and in some occassions: The Server service is not started.
Error image link https://i.stack.imgur.com/3xZqE.jpg
I kept looking and found the answer here: https://superuser.com/a/1126123
David Rios
- 101
- 2