I bought new WD Blue drive and I want to spin it down when not in use for 10 seconds. Previously I used HDDScan 3.3 with Segate drive but it don't work with WD drive. Is there any other way to spindown hdd when not in use after certain time?
Asked
Active
Viewed 3,681 times
0
-
1I strongly recommend _not_ using timeouts so short unless it’s a 2.5″ drive. It will cause unnecessary wear and delays. – Daniel B Mar 09 '22 at 10:33
2 Answers
0
This is achieved by opening Control Panel, then navigating to Power Options > Edit Plan Settings (or click change plan settings next to one of the listed plans). From here, click Change advanced power settings
In the dialog, expand Hard disk, and specify a custom time for the given plan.
Note, the minimum time is 1 minute.
spikey_richie
- 8,367
- 2
- 25
- 42
0
It's probably the internal power management on the drive's firmware as opposed to windows spinning the drive down. You can control this with the hdparm utility which is native to GNU/Linux but there are windows packages available(I believe, never used them myself). Green/Blue drives usually have very aggressive power saving options, I had EEEPC 1000H which had one of those drives and it was spinning down quite fast. With hdparm, I was able to control this.
Check out these links, the first explains how to use the utility, the second is the windows packages.
https://askubuntu.com/questions/39760/how-can-i-control-hdd-spin-down-time
What is an alternative to Linux utility hdparm on Windows 8?
http://www.thewindowsclub.com/prevent-hard-drive-going-sleep-windows
Steps:
Search power & sleep settings in Cortana, open the settings window.
Click Additional power settings
Click on Change plan settings for the current plan
Click Change advanced power settings
Hard disk > Turn off hard disk after, change it to 0 to disable
