34

enter image description here

What are the white rubber condoms? They can be unrolled like a condom. For scale the battery is AA.

Ian Newson
  • 515
  • 4
  • 14
  • 3
    Well, have you ever "smeared on" thermal paste with a finger, trying to wash it afterwards? Maybe then you could guess what to do with those "condoms" next time ;-) – U. Windl May 20 '22 at 06:35
  • 4
    @Windl no actually, I've always used an included bit of plastic or something like a credit card. This one actually included a plastic spreader tool as well. – Ian Newson May 20 '22 at 08:01
  • 1
    I didn't think you were even meant to manually smear thermal paste? At least for CPUs I thought you jut put it on (as a blob / cross / line) and let the CPU heatsink pressure spread it out? – Tim May 21 '22 at 13:43
  • https://www.pcmag.com/news/pc-user-finds-condom-like-finger-glove-inside-nvidia-rtx-3090-graphics vaguely related – Journeyman Geek May 21 '22 at 16:43
  • @Tim some companies give you a little template and a card, others suggest doing the "blob" method. This looks... different When I did it last, I did both cause why not :D – Journeyman Geek May 21 '22 at 16:44
  • @Tim this is probably only the second time I've bought thermal paste independently from a CPU or cooler. I've guessing therefore the finger cots are included for miscellaneous purposes other than CPUs, or maybe it's for the free marketing from posts like this! :) – Ian Newson May 21 '22 at 19:15
  • 1
    @Tim The problem with putting on a centered blob and then press the parts together is that if you use to little, not the whole surface will be covered, and if you use too much, you'll have a real mess wen the thermal paste covers the circuit board. So IMHO "finger smearing" is the preferred controlled way to do it properly. – U. Windl May 23 '22 at 06:00

1 Answers1

66

You're looking at finger protection, called finger cots, to allow you to spread the material over the heat conducting surfaces and not collect the grease into your skin. Other, medical application uses exist.

Available at Amazon and many online sources. Image below from a non-Amazon site.

Finger Cots

fred_dot_u
  • 2,535
  • 1
  • 12
  • 9
  • 4
    Prior to these, when paste came with instructions, the use of plastic wrap on the fingers was encouraged to fill extrusion grooves in heatsinks that were less than optically flat. – mckenzm May 19 '22 at 11:57
  • 11
    They’re also used in food service, where they don’t want a minor accident with a knife to send an employee home for days out of worry over trace amounts of blood. Put a band-aid on the nick and a cot over that to keep water out, then get back to food prep, dish washing, or whatever. – Warren Young May 19 '22 at 14:10
  • 28
    "and not collect the grease into your skin". Or perhaps it's to protect the thermal paste from the oil on your fingers, which would reduce the conductivity of the thermal paste. – pacoverflow May 19 '22 at 16:38
  • 14
    Back in the old days, you'd use a razor blade or the edge of a credit card, but technology marches on, and neither an electric shaver nor a smartphone is much good at spreading thermal paste. – Mark May 19 '22 at 23:54
  • 3
    Also used in watchmaking to keep skin oils off the internals of mechanical watches. The oil can attract dust or dirt which can hinder the inner workings and affect overall performance. – dKen May 20 '22 at 04:10
  • We use these to apply medicinal cream to the bare skin on the underside of our cat's ears. – John Gordon May 21 '22 at 02:01