Questions tagged [cas]
12 questions
11
votes
1 answer
How does RAM frequency and latency differ? How does it affect performance?
I have a question regarding two specifications of RAM memory, the amount of Mhz and the latency timings (example: 9-9-9-24).
Which one of the two is most important for system performance and why? Also what exactly is the difference between the two?
user62234
7
votes
4 answers
Does RAM timings with n-n-n-3n value perform better than anything else?
I want to ask something:
Does RAM timings with n-n-n-3n (i.e. 8-8-8-24, 9-9-9-27, etc) perform better or is optimized more than the other who doesn't (i.e. 7-8-7-21, 9-9-9-24, etc)?
Frost Atronach
4
votes
1 answer
Does RAM latency/timing affect motherboard compatibility?
When shopping, it's common for RAM manufacturers to list the frequency, timings, and voltage that RAM has been tested to run stable at. For example, the Corsair Vengeance LPX CMK32GX4M4B3000C15 has been tested by Corsair to run at 3000MHz with…
Allen Pestaluky
- 757
- 2
- 10
- 19
3
votes
1 answer
Which RAM should I prefer (CL vs PC)?
I'm thinking to buy new RAM (for Lenovo 320 15AST, motherboard is LNVNB161216).
I had 4GB, I need 8GB.
My current RAM is m471a5143sb1 2133Mhz, CAS (CL) 17, PC19200.
I was looking at two with such specs:
Crucial [CT8G4SFD8213] 2133 Mhz, PC17000,…
Jack J
- 47
- 1
- 7
1
vote
0 answers
How to install CAS and set it up on ubuntu
I have around 5-6 years working with Java/JavaEE ( maven, Tomcat, etc..) but the official installation guide is so confused. I have no idea what I have to do :
How do I build/download that cas.war
Anything else I need to install apart form…
Phung D. An
- 123
- 3
0
votes
0 answers
Guess correct stable memory/RAM CAS?
I have several APACER 8GB UNB PC3-12800 CL11 but i could not find any document about correct CAS .
Usually the CAS written on piece of paper which attached to RAM . Motherboard bios shows the part number of DIMMs are 78.c1get.9l10c and chipset NO…
Omid Kosari
- 349
- 2
- 14
0
votes
2 answers
RAM: 1333 4x4GB cas7 vs 1333 2x8gb cas9
Reading around, i know that the cas7 1333s will time faster of course... however, when more ram stix are involved, there may be a delay in read times.
Can someone explain which setup would end up being faster? Lets keep it at DualChannel specs.
Anthony Miller
- 1,594
- 4
- 16
- 23
0
votes
0 answers
Will a PC4-21300 module be compatible with a PC4-19200 module?
I have two PC4-19200 modules (4Gb each) in my laptop. Both modules are by Hynix (HMA851S6AFR6N-UH) and have a CAS latency of 17.
I want to buy a single Kingston module (KVR26S19D8/16, PC4-21300) but its indicated CAS latency is 19.
Will the…
CopperKettle
- 217
- 1
- 6
- 21
0
votes
1 answer
How do I configure the openIdconnect plugin in Tuleap?
I'm trying to configure the openIdconnect plugin in the Tuleap. I have a CAS service keycloak and in Tuleap I installed the plugin and created a provider, then I put the urls to authorization, token and user info. But when I enter with a login and…
0
votes
1 answer
Wifi with CAS Authentication
I want to set up an access point for my student organisation providing to our members only network access, thus i would like to get them authenticated through our CAS System.
The hardware that i have right now available is :
ZTE ZXV10 H108L
BaudTec…
Dimitris Sapikas
- 111
- 8
0
votes
0 answers
Mix/match RAM of different timings?
My motherboard has 4 slots (dual channel). I currently have 2x4GB of DDR3-1600 RAM and I want to add another 2x4GB sticks, also DDR3-1600 in order to get 16GB of RAM. The thing is, my current RAM has a CAS Latency of 8, with timing 8-8-8-24, and to…
user2510822
- 1
- 1
- 1
-1
votes
2 answers
Replace DDR RAM with a one that has different CL
I have an old PC, which has this motherboard ASRock 775i65G and it has currently 512M RAM. It has 2 of Apacer DDR 256Mb PC3200 (77.G0639.9CJ)
I want to upgrade the RAM into 2GB (which is the maximum capacity) and I found some DDR RAM which differs…
yaylitzis
- 239
- 1
- 3
- 17